Blog

VantageScore 4.0 and FICO 10T for mortgages, a timeline since 2025

The dated sequence of FHFA announcements on newer mortgage scores, what is settled as of November 2026, and what to verify in the Selling Guide first.

For many years the credit score behind a conventional mortgage was a specific, older generation of the FICO Score formula, and no one in the consumer market could do much about it. Since mid-2025 the federal agency that oversees Fannie Mae and Freddie Mac has announced, in steps, that newer scoring models will be allowed. This is a timeline of those steps as reported through November 2026, with a plain separation of what is firm, what the reports disagree about, and what you should check on the lender's own page before relying on any of it.

Two cautions up front. First, the events below come mostly from trade press and law-firm summaries, not from the agency documents themselves, and the reports differ on some dates and on how broadly each step applied. Second, this is a changing topic: anything dated after November 2026 is not covered. For a mortgage you actually plan to take, the authoritative sources are your lender and the current Fannie Mae and Freddie Mac selling guides.

The starting point: classic scores and three bureaus

Before 2025, the typical conventional mortgage underwriting used older "classic" FICO score versions, run against files from each of the three national bureaus (the credit bureau companies). A lender pulled a combined report (the "tri-merge" described in how a mortgage lender turns three bureau scores into one) and used a middle score. Newer models existed, including later FICO versions and VantageScore 3.0 and 4.0, and card issuers, auto lenders and personal-loan lenders used many of them. Mortgages were the large exception.

This is why a score you check on a free app often does not match what a mortgage lender sees, and why the question "which model?" matters more for a mortgage than for nearly any other credit application. Which FICO version does a lender pull, and can you find out? covers the broader picture, and why the score my mortgage lender pulled is lower than my app's explains the gap.

July 8, 2025: VantageScore 4.0 announced as allowed

On July 8, 2025, the director of the Federal Housing Finance Agency, Bill Pulte, announced that Fannie Mae and Freddie Mac would allow lenders to use VantageScore 4.0, and that the requirement to pull a tri-merge report would remain. Press coverage in the days that followed, including a mid-July 2025 report, noted that in practice the two companies were still requiring classic FICO at that time. The announcement was a statement of direction. Lenders cannot use a model for loans they sell until the buyers' own systems and selling guides accept it, and those changes take months of technical work.

What was settled that day: the direction, and the continued tri-merge. What was not settled: when a lender could actually deliver a loan underwritten on VantageScore 4.0.

November 2025: FICO Score 10 T "very close"

In November 2025, according to a report quoting the same FHFA director, the agency was "very close" to a deal that would allow FICO Score 10 T as well. FICO Score 10 T is a newer FICO version that uses "trended" data, meaning not just a balance on the statement date but how balances moved over time. A cardholder who pays in full each month and one who revolves can show the same balance on a given day, but the trend tells them apart.

That item is a report of an intention, not a rule. A statement that a deal is close does not change the underwriting guide.

April 22, 2026: next steps from FHFA and HUD

On April 22, 2026, FHFA and the Department of Housing and Urban Development announced next steps, according to mortgage trade coverage and a law-firm update. As reported:

  • Fannie Mae and Freddie Mac updated their selling policies so that VantageScore 4.0 could be used, with one account describing an initial limited rollout to approved lenders.
  • FICO Score 10 T was to follow later.
  • The Federal Housing Administration, which is part of HUD, was described as moving to adopt the new models for its own loans.

This is the first step in the sequence that touched the written selling policies, which is the document lenders actually follow. It still left open when each lender could use the models and in what form.

Later in 2026: reports of a wider rollout

Another outlet reported that FHFA later directed the two companies to open VantageScore 4.0 to all lenders, not only those in the initial group. A lender guide said the historical data FICO 10 T needs for the two companies' systems was expected in summer 2026. The reports differ on dates and scope. Some describe a phased approach, with different types of loans and different lenders moving at different times.

For a borrower this is the murkiest part of the timeline. If you read a headline that says "mortgage lenders can now use VantageScore," the headline may be accurate for the policy and still not describe what your particular lender can do today.

What is settled and what to verify

Question As of November 2026 What to do
Is VantageScore 4.0 allowed by the two big buyers of conventional loans? Reported yes, since updated selling policies in spring 2026 Ask your lender whether it uses it on your loan
Is FICO Score 10 T allowed? Reported as planned for later; the reports differ on timing Check the current Selling Guide and ask the lender
Is the tri-merge requirement gone? Reported as kept Expect three bureaus to be pulled
Do FHA loans use the new models? Described as moving toward adoption Ask a lender that makes FHA loans
Do card applications follow these rules? No Card issuers choose among many models and internal systems

The last row is easy to miss. These mortgage rules do not govern credit cards, auto loans or personal loans. A card issuer decides for itself which score versions to read.

How the newer models differ from the classic scores

The practical differences are worth knowing, because they explain who may benefit and who may not.

Thin files. VantageScore 4.0 can generate a score for a file with as little as one month of history. FICO's general models need an account at least six months old with activity within the past six months. A thin file borrower who gets no score under one model may get one under another. The details of the timeline are in I have a card but no credit score yet. How long does that take?.

Rent. FICO Score 10 T and VantageScore 4.0 can incorporate rent payment history, but only if the rent is reported to the bureaus. One rent-reporting company estimates, in a vendor figure that should be treated cautiously, that rent is absent from most renters' files. If your rent is not reported, no model can read it. rent reporting explains how it is done, and Should I pay to have my rent reported to the credit bureaus? weighs the cost against the likely benefit.

Trended data. Models that read balance trends can reward someone who steadily pays down balances and penalize someone whose balances keep growing, even if both show the same figure on a single date.

Weights. Each model has its own weights. FICO's general model gives payment history about 35 percent and amounts owed about 30 percent, while VantageScore 4.0 uses different weights, and one source lists payment history at 41 percent for it. The weights are not directly comparable between companies, so a given file can score higher under one model and lower under the other. FICO Score and VantageScore compared, and why the numbers differ sets them out.

A worked illustration of why the model matters

Say two lenders each pull Jordan's files. These numbers are invented to show the mechanism and do not describe any real model.

Bureau Older FICO version VantageScore 4.0
Bureau A 688 705
Bureau B 701 712
Bureau C 694 698

Under the older version the middle score is 694. Under VantageScore the middle score is 705. An 11-point difference could cross a pricing band, or not. The same person, the same debts and the same bureaus produce two answers.

Now change the example slightly. Say Bureau C has no score under the older version because the one open account was opened three months ago. The lender would then have only two scores and would use the lower, 688. Under VantageScore, which can score the file, there are three scores. Whether that helps or hurts depends on the numbers, but it shows why "which model" can decide whether you have a standard file at all.

Neither version is "right." What the example shows is that, as models change, borrowers with similar profiles can see different results, in either direction.

Why an announcement is not the same as a change at your lender

It helps to know why these steps arrive one at a time, because the gap between a headline and a closing table is where most confusion comes from.

A mortgage that is sold to Fannie Mae or Freddie Mac has to meet that buyer's written rules, and the lender usually checks the loan against the buyer's automated underwriting system before closing. If a lender uses a score the buyer does not accept, the buyer can refuse the loan or require the lender to take it back. That risk is why lenders wait for the written selling policy, for the buyer's systems to be updated and tested, and for their own loan-origination software and credit vendors to support the new model.

Several separate things therefore have to line up:

  1. The policy. The selling guide must say the model is allowed, and for which loans.
  2. The buyer's systems. The automated underwriting engine has to accept the new score as an input and has to have been calibrated on it.
  3. The credit vendors. The companies that assemble the merged report have to be able to order and deliver the new scores from all three bureaus.
  4. The lender. The lender has to build the new model into its pricing, its checklists and its staff training, and may choose to start with some loan types or channels first.
  5. The pricing. Rate sheets are set by score band. A new model's numbers do not map neatly onto the old bands, so pricing tables may be redrawn.

The reported "limited rollout to approved lenders" in April 2026 is consistent with this picture: a phased start is how a change like this tends to proceed. It also explains why two borrowers in the same city, applying in the same month, could be told different things by two lenders and both be correct.

A buyer's calendar: how to use this timeline

Suppose a hypothetical buyer, Priya, plans to apply for a mortgage sometime in the next year. She does not need to follow the news weekly. A sensible rhythm looks like this.

When What Priya does
About six months before applying Reads all three reports, notes any account that appears at only one bureau, and fixes real errors
About three months before Asks two or three lenders which models and bureaus they use, and what their minimum score is for her loan type
About one month before Checks that balances reported on statements are low and that no new accounts are planned
Before the credit pull Chooses a compact window to talk to lenders, so inquiries for the same loan type are grouped
After the pull Asks to see the three scores and the model used, and compares them with her own reports

The dates are illustrative, not required. What matters is that the one decision that turns on the model, which lender and which loan, is made with the lender's answer in hand and not with a headline.

What a borrower can do now

  1. Ask which score model and bureaus the lender will use. Ask it before the application, since the credit pull is a hard inquiry or soft inquiry: what each one does to your score event that will show on your reports.
  2. Ask for the lender's minimum score for your loan type and whether it uses a different minimum under the new model.
  3. Check the Selling Guide yourself if you like. Fannie Mae and Freddie Mac publish theirs, and a loan officer can point to the relevant section. One report said dates and scope differ among sources, so rely on the current guide.
  4. Do not pay a company to "optimize for the new score." The core actions are the same under every model: pay on time, keep balances low relative to limits, avoid new debt before applying, and correct real errors. The article card habits in the months before a mortgage application, in order shows the order.
  5. Look at your own files at all three bureaus. The mortgage will use all three, and they often differ.

What does not change

Some things hold across every model in the timeline.

  • Payment history is the biggest factor in the scoring models described by FICO and VantageScore.
  • A late payment, collection or bankruptcy stays on the report for the periods set by federal law.
  • Lenders look at more than the score: income, debts, the down payment and the property decide most of the decision.
  • A score is a snapshot, so the number on the day of the pull is the one that counts.

Common misreadings of the news

"VantageScore is now the mortgage score." It was announced as allowed. Whether a given lender uses it for a given loan is a separate question.

"The tri-merge is gone, so one bureau is enough." Reports at each stage said the tri-merge stayed.

"Newer models will raise everybody's score." Newer models read different data, and some people will score higher, some lower, and some about the same.

"Credit cards now use mortgage rules." They do not.

Key takeaways

  • On July 8, 2025, FHFA announced that Fannie Mae and Freddie Mac would allow VantageScore 4.0 and keep the tri-merge; in practice lenders were still using classic FICO then.
  • In November 2025 the agency's director said a FICO Score 10 T deal was "very close," and on April 22, 2026 FHFA and HUD announced next steps, with VantageScore 4.0 allowed first and FICO 10 T later.
  • Reports about the rollout differ on dates and scope, so what applies to your loan is a question for your lender and the current Selling Guide.
  • The new models read thin files and trended data differently, and can use rent if it is reported, so results may move up or down.
  • The best preparation is the same under any model: all three reports checked, errors corrected, balances low, no new debt before the application.

Terms used in this article

Latest on this topic