Blog

Which FICO version does a lender pull, and can you find out?

Many FICO versions and industry scores exist, and each lender chooses. How the choice is made, why a free score may not match, and how to ask which one is used.

There is no single FICO Score, and no single credit score of any brand. There is a family of them, produced over the years as the scoring models were updated, and a family of industry-specific variants built for particular kinds of lending. A lender that wants a score from you does not request "your FICO Score". It requests a specific version from a specific bureau, and different lenders request different ones. That is why the number in a free app and the number a lender pulls can differ even when both say FICO on the label.

This post explains how the choice gets made, what you can and cannot find out and what to do about the uncertainty. It describes how the system works in general. A particular lender's choice is its own, and it can change without notice.

Why there are so many versions

A FICO Score is the output of a statistical model. FICO updates its models from time to time: the newer ones are trained on more recent data and can use information older ones ignore. Consumer guides commonly name versions numbered 8, 9 and 10, and FICO has also built variants that use additional data, such as FICO Score 10 T, and models for buy-now-pay-later data, FICO Score 10 BNPL and FICO Score 10 T BNPL, which are meant for use when that data is reported at scale. Adoption of the newer models among lenders has been gradual.

The reason older versions stay in use is practical. A lender that has built its approval rules, price tiers and risk models around one version cannot swap it casually. Changing the score means revalidating everything that depends on it. Some lenders move slowly, and some are held to a specific version by an investor or a regulator. The result is that several versions are in active use at the same time.

For the same reason, "FICO versus VantageScore" is not the whole comparison. A person can have a different score from each version of each brand, on each of three bureaus, and a credit bureau is the company that holds the file the model reads. FICO Score and VantageScore compared, and why the numbers differ sets the two brands side by side.

Two kinds of FICO Score

At a high level, the versions fall into two groups.

  • Base scores. General-purpose versions meant to estimate the likelihood of serious delinquency across all kinds of credit.
  • Industry-specific scores. Versions tuned for a particular type of lending, such as auto loans or bank cards. They use the same kind of report data and are weighted for what predicts repayment of that kind of loan.

An industry-specific score can use a different range or different weighting from a base score. That is one more reason the same file can return noticeably different numbers. Lenders using an industry version are doing nothing unusual; they are picking the tool built for their product.

How a lender ends up with one score

The lender controls the choice in four steps, and you see none of them.

  1. The lender sets a policy. Its credit team picks which score versions it uses for which products, and writes its cutoffs and price tiers around them.
  2. The application triggers a pull. When you apply and consent, the lender requests a report and a score from one or more bureaus.
  3. The request names a product. The lender asks the bureau for the specific score version it wants. The bureau returns that score computed on its file.
  4. The lender may use more than one. Some lenders pull a score from a single bureau; some pull from several and use the lowest, the highest, the average or the middle. Mortgage lending, for example, commonly uses reports from all three bureaus.

Because the lender picks the version and the bureau, the score it sees is one cell in a grid of versions across bureaus. A table makes the grid concrete.

One file, a grid of numbers

Say Priya's credit file is the same at all three bureaus apart from small differences in what lenders reported. Here are made-up scores from different versions. They illustrate the spread, not any actual model.

Version Equifax file Experian file TransUnion file
Older base version 701 706 703
Newer base version 709 712 710
Auto-industry version 694 699 697
Card-industry version 715 717 713

Priya's file did not change between rows. The spread within a row, 701 to 706, comes from the bureaus holding slightly different data. The spread within a column, 694 to 715 on the Equifax file, comes from the versions. Neither is an error. A card issuer that uses the card-industry version might see 715 and an auto lender might see 694, from the same person on the same day.

If a free app shows Priya the 709 from the newer base version, she may feel informed. It is real, and neither lender will necessarily see it.

What changes between versions

FICO documents the differences between versions, and they are technical. In general terms, newer models can differ in:

  • How they treat certain items, such as collections that have been paid or medical collections, and how heavily older negatives weigh as they age. The specifics are in FICO's documentation and change by version.
  • What data they use. Rent payments can be counted by FICO Score 10 T and VantageScore 4.0, but only when rent is reported to the bureaus; one rent-reporting company estimates rent is absent from 87 percent of renters' files, a vendor estimate.
  • Which accounts count, including authorized-user accounts: FICO and VantageScore typically include authorized-user tradelines if the issuer reports them, though FICO 8 is generally described as lessening the effect.

Mostly, though, the versions agree on the basics. The large behaviors, paying on time, keeping balances low against limits, avoiding collections, avoiding unneeded applications, help under every version. Version differences move a score by margins, not by direction. The five general factor weights, according to myFICO, are about 35 percent payment history, 30 percent amounts owed, 15 percent length of history, 10 percent new credit and 10 percent mix, and What goes into a FICO Score and how much each part counts explains them.

What lenders typically use by product

Lenders do not publish their policies in detail, so this section describes only what is established and flags the rest as variable.

Product What is generally true What varies
Credit cards Issuers choose among many FICO and VantageScore versions and their own internal models Which one, and whether it differs by product
Auto loans Industry-specific scores are common Version and bureau
Personal loans Varies by lender, with a mix of base scores and internal models Nearly everything
Mortgages Rules are set by the mortgage-investor companies and FHFA, and have been changing since 2025 Rollout timing and which lenders have adopted what
Renting or utilities Screening companies use their own products Nearly everything

Mortgages are the one area with written rules, so a short note on them. On July 8, 2025, FHFA Director Bill Pulte announced that Fannie Mae and Freddie Mac would allow VantageScore 4.0 and keep the tri-merge requirement, while reporting at the time said they still required Classic FICO in practice. In November 2025 he said FHFA was very close to a deal to accept FICO Score 10 T. On April 22, 2026, FHFA and HUD announced that Fannie and Freddie updated their selling policies to allow VantageScore 4.0, with FICO 10 T later, and with FHA moving toward the new models. Later reports differ on dates and scope, so a home buyer should ask the lender which score and which bureaus it will use and check Fannie Mae's Selling Guide. VantageScore 4.0 and FICO 10T for mortgages, a timeline since 2025 follows the sequence.

Card applications do not use those mortgage rules.

Can you find out which version a lender pulled?

Sometimes, and rarely in advance. Here are the ways, from most to least reliable.

  1. Ask the lender before you apply. A loan officer or a customer-service representative may say which score and which bureau the lender uses for that product. Some will not, and some do not know. A direct question is free: "Which credit score model and which bureau do you use for this product, and will the check be a hard or a soft inquiry?"
  2. Read the notice after a decision. If you are denied, the lender must send an adverse action notice with specific reasons, or the right to request them, within 30 days of a completed application. Such a notice can also identify the bureau or the score the lender used, and some notices include the score itself. Read it for the name of the source, then ask the lender which version it was.
  3. Check the label on any score you see. A free source normally states a brand and sometimes a version. If it does not, look in the help pages. If it never says, treat the number as a rough indicator.
  4. For a mortgage, ask for the lender's score disclosure, since mortgage lenders typically pull full reports and can tell you what they used.

What you usually cannot do is learn in advance which version a card issuer will use for an application. It may not be fixed, and it may differ by product.

A walk-through: two applications, one file

Follow Priya through a year in which she applies for two things. Everything here is illustrative.

January: a rewards card. Priya uses a pre-qualification tool on an issuer's site. It runs a soft check, shows likely offers and does not touch her score. She applies. The issuer requests a score from one bureau, using the version its policy names for that product, and decides. Priya sees none of this. What she sees afterward is an approval and a limit, or a denial with a notice. The issuer's number might be 715 in the grid above, or any other cell, and it does not matter which, because she was approved.

August: a car loan. The dealership's lender pulls its own score, perhaps an auto-industry version, from a different bureau. That score reads lower, say 694 in the grid, because the version weighs the file differently. The lender offers a rate from a tier that is a notch less favorable than the one she hoped for. Priya had been tracking 709 on a free app and feels misled by the app. The app was not wrong. It showed a different version on a different bureau's file.

What helps her. Two things, both free. First, an earlier conversation: had she asked the lender before applying which score and bureau it used, she could have looked for errors on that bureau's report in advance and understood why the offer differed from her expectation. Second, the inputs: whichever version the lender used, the same behaviors moved it. Lower reported balances, on-time payments and no new applications in the months before the loan would have helped every cell in the grid.

What does not help her. Chasing the 709. Applying for more credit to push up a number. Paying anyone who claims to know the lender's version and to raise it. If she believes a decision was unfair, the lender's adverse action notice tells her the reasons or her right to ask for them, and the Equal Credit Opportunity Act bars credit discrimination on race, color, religion, national origin, sex, marital status, age (if she can contract), receipt of public-assistance income and good-faith exercise of consumer-credit rights. The CFPB takes complaints at consumerfinance.gov/complaint.

The same walk-through shows why the credit score ranges guide is a guide to labels and not a map of lender cutoffs. A score of 694 or 715 means something different to each lender, because each lender sets its own tiers, and a single band label cannot capture that.

What to do about the uncertainty

The uncertainty does not need to be resolved. It needs to be managed.

  • Track one score consistently and note its brand, version, bureau and date. The direction is what is informative, as why is my credit score a different number on every app and site? explains. credit monitoring services typically show one or two versions.
  • Work on the inputs. Pay every bill on time, keep reported balances low, avoid unneeded applications and check your reports for errors. These improve every version.
  • Do not buy a pile of scores hoping to guess the lender's. The spread among versions does not tell you which one a lender will use, and the money is better spent on paying down a balance.
  • For a big loan, ask early. Mortgage and other large loans are where the version matters most, and the lender can tell you what it pulls.
  • Treat a free score as a thermometer, not a quote. It tells you whether your file is warming or cooling.

Mistakes to avoid

Assuming "FICO" on a label means the lender's score. It names a brand, not a version.

Comparing across sources. A number from one version on one bureau is not comparable to a number from another.

Assuming a high score from one source guarantees a result. Lenders pull their own, and they also look at income, debts and the purpose of the loan, as Is a 680 credit score good? What lenders look at besides the number explains.

Quoting your best number to a lender. They will pull their own.

Paying a stranger who claims to improve a "lender score". No one can alter the underlying file except by correcting errors, which you can do for free. If something looks wrong, dispute it with the bureau and the lender that reported it, and use the CFPB complaint process at consumerfinance.gov/complaint if it is not fixed.

Key takeaways

  • There is no single FICO Score: there are several base versions, newer variants, models for new data such as rent and BNPL, and industry-specific scores for lending such as auto and bank cards.
  • A lender chooses a specific version and bureau; the same file can return a grid of numbers, 694 to 717 in the illustration, with none of them wrong.
  • Card issuers choose among many FICO and VantageScore versions and their own models; mortgage rules are written down and have been changing since 2025, so ask the lender and check Fannie Mae's Selling Guide.
  • You can sometimes learn the version by asking before you apply or by reading an adverse action notice, which must arrive within 30 days of a completed application if you are denied.
  • All versions agree on the basics, so on-time payment, low reported balances and fewer applications help under any of them.
  • Track one score consistently for direction and treat a free number as a thermometer, not a quote.

Terms used in this article

Related tools

Latest on this topic